Bending deformation of grinding roller shaft during milling operation

All discussions welcome
Post Reply
User avatar
kuangshanposui
Posts: 13
Joined: December 11th, 2018, 3:09 am

If the bending and deformation of the Mobile Crusher Qualities shaft occurs during the operation of the bentonite mill, the normal operation of the milling equipment cannot be guaranteed. So what are the reasons for the bent deformation in the roller shaft during the operation of the bentonite mill? Each type of bentonite milling equipment has different requirements for the feed particle size, and the feed particle size is too large. In the case of bentonite material, the number of collisions with the spindle will be relatively large with the rotation of the mill.
In this way, the deformation of the How Much is A Mobile Stone Machine roller shaft of the bentonite mill will occur. Therefore, when we use the milling equipment, we must pay attention to the control of the particle size of the feed to avoid affecting the roller shaft. Some users have overloaded the bentonite mill for a long time in order to greatly increase the processing output. This greatly enhances the pressure of the various components during the operation of the mill, thereby increasing the wear of the roller shaft and gradually causing its bending and deformation. Therefore, maintaining the correct operation mode to avoid long-term overload operation of the bentonite mill is an important factor to prevent the deformation of the roller shaft. Since the bentonite mill is generally produced in the open air, the ground material contains a certain amount of moisture. This will inevitably cause the equipment to rust after a long period of use. If we do not deal with the corrosion of these grinding roller shafts in time, it will greatly reduce the working intensity of the equipment and even cause the mill to run unevenly. It will also affect the quality of the material.
Post Reply