Slurry Pump Pricelist
-
g109cx
- Posts: 10
- Joined: April 2nd, 2019, 8:56 pm
Introduction:
The EHR series are cantilevered, horizontal, centrifugal slurry pumps. They are designed for the handling of highly abrasive, high-density slurries. The slurry pumps of this series can be installed in multistage series.
Structure:
The impellers of this kind of slurry pump are made of rubber. The frame plates for this kind of slurry pump have replaceable wear-resistant rubber liners. The discharge branch can be oriented to any of the eight different positions. The shaft seals of this kind of slurry pump may adopt shaft gland seal or expeller seal.
EHR series slurry pumps are similar to EHM series in structure. The main difference between EHM and EHR is the material of wet parts, which are natural rubber, chloroprene rubber or other wear-resistant rubbers. EHR are more suitable in delivering strong corrosive or abrasive slurries of small particle size without sharp edges.
Frame Plate and Cover Plate: The outer casing is made of grey cast iron or ductile cast iron according to the working pressure, with split with split structure and blots connected，which ensuring security and easy replacement of the wet parts;
Interchangeable anti-corrosive wet parts made of natural rubber or other customized elastomer materials;
The discharge direction can be oriented to any eight positions at the interval of 45 degrees;
It can be installed in multistage series to meet the delivery for long distance;
Various drive types: DC(direct connection), V-belt drive, gear box reducer, hydraulic couplings, VFD, SCR control, etc;
The shaft seal can be packing seal, expeller seal or mechanical seal;Slurry Pump Pricelist
website:http://www.exelnsen.com/slurry-pump/
The EHR series are cantilevered, horizontal, centrifugal slurry pumps. They are designed for the handling of highly abrasive, high-density slurries. The slurry pumps of this series can be installed in multistage series.
Structure:
The impellers of this kind of slurry pump are made of rubber. The frame plates for this kind of slurry pump have replaceable wear-resistant rubber liners. The discharge branch can be oriented to any of the eight different positions. The shaft seals of this kind of slurry pump may adopt shaft gland seal or expeller seal.
EHR series slurry pumps are similar to EHM series in structure. The main difference between EHM and EHR is the material of wet parts, which are natural rubber, chloroprene rubber or other wear-resistant rubbers. EHR are more suitable in delivering strong corrosive or abrasive slurries of small particle size without sharp edges.
Frame Plate and Cover Plate: The outer casing is made of grey cast iron or ductile cast iron according to the working pressure, with split with split structure and blots connected，which ensuring security and easy replacement of the wet parts;
Interchangeable anti-corrosive wet parts made of natural rubber or other customized elastomer materials;
The discharge direction can be oriented to any eight positions at the interval of 45 degrees;
It can be installed in multistage series to meet the delivery for long distance;
Various drive types: DC(direct connection), V-belt drive, gear box reducer, hydraulic couplings, VFD, SCR control, etc;
The shaft seal can be packing seal, expeller seal or mechanical seal;Slurry Pump Pricelist
website:http://www.exelnsen.com/slurry-pump/
