Aluminium Grip Plate

Technology daily digest
Post Reply
User avatar
crushermachine2
Posts: 35
Joined: May 25th, 2018, 4:16 am

Ordinary aluminum panels often cannot meet specific ground, especially convex shapes, but aluminum handle panels can. Checked 4x8 aluminum sheet can be used for special occasions, especially for anti-slip and decorative effects. Let's learn about the specifications and other related knowledge of the aluminum plate.

As the name suggests, an aluminum grab plate is an aluminum plate with a raised pattern on the surface that looks like a grab plate. The general patterns are 1-bar grip, 2-bar grip, 3-bar grip, 5-bar grip, diamond shape, as well as flat circle, T shape and so on. , also known as plain text aluminum plate. The shape of the handle aluminum lattice plate is very beautiful, and the most important feature is that it has strong anti-skid property, which is very practical and has a wide range of applications in many occasions. The application field is usually where anti-skid is required, such as shipbuilding, machinery, decoration, construction, transportation, etc.

The basic thicknesses of the aluminum grips on the market are mainly 2.5mm, 3mm, 3.5mm, 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 7mm, 8mm, except that there are no 6.5mm and 7.5mm, for every 0.5mm thickness, there are A square grip aluminum gauge thickness size in mm.

As far as the thickness of the aluminum plywood is concerned, deviations are normal. When the thickness is 2.5-3.5mm, the allowable and standard deviation is 0.3mm; when the thickness is 4mm and 4.5mm, the allowable deviation is 0.4mm; when the thickness is 5mm and 5.5mm, the allowable deviation is 0.4mm, and the allowable upward deviation is 0.4mm, When the downward deviation is 0.5mm, when the thickness is 6mm, the allowable upward deviation is 0.5mm, when the downward deviation is 0.6mm, when the thickness is 7mm, the allowable upward deviation is 0.6mm, and when the downward deviation is 0.7mm, when the thickness is 8mm, the allowable upward deviation It is 0.6mm, and the downward deviation is 0.8mm. As long as it is within the allowable range, these errors are normal.
Post Reply