Introduce several forming methods of aluminum plate
-
crushermachine2
- Posts: 35
- Joined: May 25th, 2018, 4:16 am
The patterned aluminum plate is different from the ordinary 4 x 8 aluminum sheet: the straight lines are processed on the surface of the aluminum plate by mechanical friction, and the brushes are used to remove the scratches on the surface of the aluminum plate and decorate the surface of the aluminum plate. Straight wire drawing has continuous spinning and intermittent spinning.
Aluminum plate: The printed aluminum plate is a matt silk-screened aluminum plate with irregularity and no obvious lines, which is obtained by rubbing the left and right 1/8 aluminum sheet back and forth under the high-speed wire brush.
Threaded Aluminum: Aluminum is a linear motion using a threaded shaft with a circular felt on a small motor that will be fastened to the table top, with the table at a 60 degree angle, use the blanket and the carriage to rotate on the aluminum surface to draw a uniform spin line width.
Aluminum squares: Aluminum squares are generally ground on the metal surface with a brush on the roller r group that produces axial movement on the brushing machine and the friction profiling machine, and wavy lines are drawn.
Rotary pattern aluminum: Spiral pattern aluminum is a kind of silk pattern obtained by using cylindrical blanket or grinding asbestos nylon wheel on a drilling machine, and polishing and rotating the metal surface with kerosene and polishing paste. Decorative treatment for decoration.
Aluminum plate: The printed aluminum plate is a matt silk-screened aluminum plate with irregularity and no obvious lines, which is obtained by rubbing the left and right 1/8 aluminum sheet back and forth under the high-speed wire brush.
Threaded Aluminum: Aluminum is a linear motion using a threaded shaft with a circular felt on a small motor that will be fastened to the table top, with the table at a 60 degree angle, use the blanket and the carriage to rotate on the aluminum surface to draw a uniform spin line width.
Aluminum squares: Aluminum squares are generally ground on the metal surface with a brush on the roller r group that produces axial movement on the brushing machine and the friction profiling machine, and wavy lines are drawn.
Rotary pattern aluminum: Spiral pattern aluminum is a kind of silk pattern obtained by using cylindrical blanket or grinding asbestos nylon wheel on a drilling machine, and polishing and rotating the metal surface with kerosene and polishing paste. Decorative treatment for decoration.
