Raymond mills require assembly because they have many components, so Raymond mill
manufacturers often need to send technicians to the site to guide installation and commissioning. There are many places to note in this process. Otherwise, it is not suitable for installing the machine, or it is caused by one or other problems during the installation of the machine. Therefore, it is important to ensure this in order to assemble the Raymond mill in place. It is often necessary to pay attention to the fact that the connection of the pipe must be completely sealed. When making the basis, the dimensional verification must be strict and the dimensions may not be correct when the host is installed. In addition, when testing the Raymond mill, you must first leave the machine idle for about 10 minutes, then tighten the internal screws and start adding materials for grinding. Hardening of the ground is a very important task, especially for the mainframe that needs to be pitted. This position should not be underestimated. This is because this part is related to the normal operation and service life of the main engine. Intensive work must be done in the right place. Raymond mills above 3216 are usually equipped with reducers. Some customers want to place the reducer on the ground. It may be relatively easy to fix, but it also has some hidden dangers, namely where the machine is. The height is relatively high and it is cumbersome to operate. This base is strong, otherwise there is a danger of collapse. After all, Raymond machines weigh more than ten tons.
What are the main features of the Raymond mill?
If you need to use a twin-shaft crusher when shredding materials, then we must know the characteristics of the equipment, what are its main features? It must consist of two relatively rotating axes. In addition, the size of the intermediate shearing knife is a size that can be selected according to the material properties of the different materials. If the material of the chopped material is relatively hard. Then we should choose the knife to be slightly thicker and slightly larger in diameter so that it may be more durable when in use. Of the many different types of shredders, the relatively stable and durable shredder is of course biaxial.